Building Engineer @ Cushman & Wakefield | Jobright.ai
JOBSarrow
RecommendedLiked
0
Applied
0
Building Engineer jobs in Garden City, NYH1B Visa Sponsored Building Engineer jobs in Garden City, NY
Be an early applicantLess than 25 applicants
company-logo

Cushman & Wakefield · 3 days ago

Building Engineer

Wonder how qualified you are to the job?

ftfMaximize your interview chances
CommercialCommercial Real Estate
check
H1B Sponsorship

Insider Connection @Cushman & Wakefield

Discover valuable connections within the company who might provide insights and potential referrals, giving your job application an inside edge.

Responsibilities

Ensure ongoing preventive maintenance and repair work orders on facility mechanical, electrical, lighting, and other installed systems, equipment, and other components.
Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it pertains to assigned client buildings.
Perform major HVAC repairs including compressor replacement, condenser replacement, evaporator coil replacement, condenser coil replacement, etc.
Perform major plumbing replacements including domestic water piping, steam trap repairs, sewage line repairs, bathroom fixture repairs, etc.
Perform electrical repairs including running and bending conduit piping, pulling cables, performing electrical panel maintenance, electric motor maintenance, and predictive maintenance using a megar on said motors and compressors.
Perform assigned facility inspections and due diligence efforts, reporting on as-found conditions impacting satisfactory client occupancy and operations.
Respond effectively to all emergencies. May require light travel during emergency events.
Operation, maintenance, and repair of all boilers, heaters, pumps, valves, and lines used in the distribution of steam and heated or processed water.
Operation, maintenance, and repair of refrigerant compressors, condensers, evaporators, traps, transfer pumps, expansion valves, stop valves, and float valves, together with all refrigerant lines and devices used to control temperature, and air conditioning systems in their entirety.
Operation, maintenance, and repair of pumps handling water or other secondary refrigerating liquids together with all valves, appurtenances, and lines used in the system.
Operation, maintenance, and repair of air compressors, together with distribution lines and all valves and devices for air control.
Operation, maintenance, and repair of water filters, softeners, piping, and pumps used in conjunction with water distribution, including all sinks and toilet bowls, including all supply lines, drains, water lines, control devices, and sprinkler systems.
Operation, maintenance, and repair of all types of electrical motors and engines used to power pumps, compressors, and fans.
Maintenance of elevators except where this type of equipment is serviced and maintained by specialized contractors.
Operation, maintenance, and repair of building automation systems for HVAC, including consoles, data gathering panels, remote sensors, and indicating devices.
Operation, maintenance, and repair of sanitary sewer systems, and sump pumps including basins, water closets, urinals, and piping.
Maintenance and repair of trash compactors, including electrical and hydraulic systems.
Maintenance and repair of all kitchen equipment excluding tenant-owned equipment.
Maintain stock and inventory control.
Recommend improvements to the preventive maintenance program on an ongoing basis.
Ensure the management team is informed of current building operations by compiling and submitting monthly reports.
Study and become familiar with the various items of equipment for assigned client locations, and the methods required to use them properly to ensure required ongoing daily client activities. To include building automation systems, fire/life safety systems, and any other building-related equipment as needed.
Recommend improvements to the preventive maintenance program on an ongoing basis.
Recognize danger and safety hazards and propose methods to eliminate them or use the correct PPE in performing the task needed.
Comply with all applicable codes, regulations, governmental agencies, and company directives related to building operations and practicing safe work habits.
Respond effectively to all emergencies. May require light travel during emergency events.
Must maintain all Federal, State, or Local licenses required for locations assigned.
Complete all required C&W Safety Training as scheduled annually.
Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance during all working hours.
General Maintenance may include but is not limited to: Repairs on toilet facilities including soap dispensers, repairs on registers and radiators, replacement of lamps and cleaning of light fixtures, removing ceiling tile, minor repairs on furniture and floors, maintaining and/or replacing door hardware, repair of floor maintenance equipment and Venetian blinds, maintenance painting in equipment rooms, cooling towers, and other building facilities, assist in the replacement of filters in the HVAC equipment, general cleaning in mechanical spaces and perimeter inductions units, cleanup of equipment in the engine room and shop, miscellaneous handyman work requires the limited use of hand tools, replace fire extinguishers when needed, must maintain all Federal, State, or Local licenses required for locations assigned.
Other assigned operational tasks may be typically expected of the Building Engineer role.

Qualification

Find out how your skills align with this job's requirements. If anything seems off, you can easily click on the tags to select or unselect skills to reflect your actual expertise.

Building EngineeringHVAC SystemsPlumbingElectricalEquipment RepairSystem DesignSystem ApplicationCFC CertificationHFC CertificationRefrigerant SystemsBoilersHeatersPumpsCompressorsGas LinesWater SystemsBuilding Systems OperationsRepairInterpersonal SkillsApprentice ProgramTrade School

Required

High School Diploma or GED Equivalent is required
Minimum of four (4) years of technical experience in all aspects of building engineering
Strong background in technical aspects of HVAC equipment and systems, plumbing, electrical, equipment repair and maintenance, and overall system design and application
Candidate must possess and maintain a valid state driver’s license
Based on location appropriate license/permit for trade as may be required, i.e., Journeyman or Master Electrician License, City License, Operators License, Steam Engineers License, etc.
Possess a valid “Universal” level certification for CFC and HFC-based refrigerants (EPA Section 608); to service, repair, or dispose of equipment that could release
Experience in operation, maintenance, and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, gas lines, water systems, and the like
Knowledgeable in energy management systems, techniques, and operations
Thorough knowledge of all building systems operations, maintenance, and repair
Excellent interpersonal skills in dealing with tenants, clients, and vendors

Preferred

Graduate of an apprentice program or trade school

Benefits

Health Insurance
Vision Insurance
Dental Insurance
Flexible Spending Accounts
Health Savings Accounts
Retirement Savings Plans
Life Insurance
Disability Insurance

Company

Cushman & Wakefield

company-logo
Cushman & Wakefield is a real estate services firm that offers retail investment, energy management, and property services.

H1B Sponsorship

Cushman & Wakefield has a track record of offering H1B sponsorships. Please note that this does not guarantee sponsorship for this specific role. Below presents additional info for your reference. (Data Powered by US Department of Labor)
Distribution of Different Job Fields Receiving Sponsorship
Trends of Total Sponsorships
2023 (2)
2022 (6)
2021 (1)
2020 (2)

Funding

Current Stage
Public Company
Total Funding
$734.8M
Key Investors
GreystoneCitizens BankSantander Bank
2023-10-11Post Ipo Debt· $223.8M
2023-08-08Post Ipo Debt· $400M
2022-10-13Post Ipo Debt· $27.3M

Leadership Team

leader-logo
Brett White
Executive Chairman and CEO
linkedin
leader-logo
Colin Wilson
Chief Executive Officer, EMEA
linkedin
Company data provided by crunchbase
logo

Orion

Your AI Copilot