M.C. Dean, Inc. · 2 months ago
Critical Facility Technician 3 - Cheyenne, WY
Cheyenne, WY
Full-time
Onsite
Senior Level, Lead/Staff
8+ years expM.C. Dean, Inc. is a company specializing in cyber-physical solutions for mission-critical facilities and complex infrastructure. They are seeking a Critical Facility Technician 3 responsible for ensuring the efficient operation of electrical, mechanical, and fire/life safety equipment within data centers, including maintenance and emergency response activities.
Information Technology
No H1B
Security Clearance RequiredU.S. Citizen Only
Responsibilities
Responsible for ensuring that all electrical, mechanical, and fire/life safety equipment within the data center is operating at peak efficiency
This involves both planned preventative maintenance of equipment, daily corrective work, and emergency response to emergent issues
The technician serves as an expert technical resource reporting to a program manager, interacting with Onsite Engineering Operations (OEO) and any third-party vendors
They are expected to be a singular focal point for all facility operations within a given data center and to support operated data centers
Data center equipment that supports mission-critical servers must maintain better than 99.999% uptime
Requires meeting all requirements of CET2
Mechanical and/or electrical OEM factory specific training or experience preferred
Strong verbal and written communication skills required
Ability to transfer knowledge and train other technicians
Utilizes safe working practices; can apply lockout/tagout, SDS, applies good housekeeping methods, etc
Ability to type and utilize common administrative and office software
Ability to read and interpret wiring diagrams, blueprints, floor plans, construction documents, safety requirements, OEM operating and maintenance instructions, job specifications, and MOP's
Must be able to troubleshoot advanced electrical circuits
Ability to use hand tools and test equipment to install, troubleshoot, and repair new or replacement parts for existing units covered under CET3 classified procedures, according to specifications and established safety guidelines, relying on MOPs, manufacturer's literature, and industry best practices to perform tasks under supervision, and ensures activities are logged in CMMS
When necessary, perform daily walk-through of facility documenting parameters such as power availability, temperature and humidity, alarm status, etc. to be catalogued and compared for identification of discrepancies and trends
Monitor and make necessary changes to site BAS, following site MOP's & SOP's
Capable of implementing all site-specific processes and procedures such as procedure creation and review standards, procedure instructions and templates, reporting an incident or outage, procedure execution, PM standards, CMMS standards and policy, work order and notification, as well as the use of Sharepoint to access CE procedures and training content
Understand the sequence of operations, how a failure of a piece of critical equipment impact other systems, and have a holistic view of the critical environment infrastructure and ability to comprehend the effect of any actions on a piece of critical equipment or systems, including: MV/LV Distribution Boards, MV/LV Breakers, UPS, Generator, Batteries, STS, ATS, AHU, DX units, Chillers, Evap Washer Systems, CRAC Units, Fuel Systems, ASCO Systems, BMS System, EPMS System, and Fire Alarm System
Conversant of the ASCO system sequence of operation and fire alarm system cause and effect matrix
Understand how to action all site primary and secondary EOP's, focusing on mastering the operator role during an emergency response
Capable of leading drills associated with the site primary and secondary EOP's
Organize safe maintenance principles for regulating and scheduling planned and unplanned activities, as well as establish and meet deadlines for work/projects
Interprets building codes and local and federal regulations as they relate to installations and applies them as required by the site
Maintain maintenance records as required by City, State, and EPA regulations
Coordinate and oversee all critical environment vendors during maintenance, emergency, and break/fix events to ensure personnel safety and maintain power to the critical load
Perform periodic technical and quality reviews of all MOPs and SOPs to ensure that the most “up-to-date” techniques and safety guidelines are utilized
Collect and generate internal and vendor field service reports describing all activities (preventive maintenance, repairs, etc.) performed at the facility; reviews all reports prior to submission to end user
Render assistance in administration and regulation of the duties of CET1/2
Conduct training with CET1/2 and other staff personnel on electrical equipment/system for maintenance, repairs and operation
If applicable to the role, perform maintenance, repair, and operation tasks of utility equipment, solar PV equipment, and/or Cogen equipment, and/or disables/enables fire alarm systems; and set up and operate electrical data capturing devices (Dranetz, Fluke PQA, etc.)
Understands and has mastered all types of mechanical and electrical systems and how each component within the system operates in conjunction with the other components and how that impacts the overall operations of the system as a whole
Qualification
Required
Applicant must have a minimum 8+ years of experience in electrical, mechanical, and fire/life safety equipment with a high school diploma or GED
Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; Ability to obtain and maintain a Top-Secret clearance
Requires meeting all requirements of CET2
Strong verbal and written communication skills required
Ability to transfer knowledge and train other technicians
Utilizes safe working practices; can apply lockout/tagout, SDS, applies good housekeeping methods, etc
Ability to type and utilize common administrative and office software
Ability to read and interpret wiring diagrams, blueprints, floor plans, construction documents, safety requirements, OEM operating and maintenance instructions, job specifications, and MOP's
Must be able to troubleshoot advanced electrical circuits
Ability to use hand tools and test equipment to install, troubleshoot, and repair new or replacement parts for existing units covered under CET3 classified procedures, according to specifications and established safety guidelines, relying on MOPs, manufacturer's literature, and industry best practices to perform tasks under supervision, and ensures activities are logged in CMMS
When necessary, perform daily walk-through of facility documenting parameters such as power availability, temperature and humidity, alarm status, etc. to be catalogued and compared for identification of discrepancies and trends
Monitor and make necessary changes to site BAS, following site MOP's & SOP's
Capable of implementing all site-specific processes and procedures such as procedure creation and review standards, procedure instructions and templates, reporting an incident or outage, procedure execution, PM standards, CMMS standards and policy, work order and notification, as well as the use of Sharepoint to access CE procedures and training content
Understand the sequence of operations, how a failure of a piece of critical equipment impact other systems, and have a holistic view of the critical environment infrastructure and ability to comprehend the effect of any actions on a piece of critical equipment or systems
Conversant of the ASCO system sequence of operation and fire alarm system cause and effect matrix
Understand how to action all site primary and secondary EOP's, focusing on mastering the operator role during an emergency response
Capable of leading drills associated with the site primary and secondary EOP's
Organize safe maintenance principles for regulating and scheduling planned and unplanned activities, as well as establish and meet deadlines for work/projects
Interprets building codes and local and federal regulations as they relate to installations and applies them as required by the site
Maintain maintenance records as required by City, State, and EPA regulations
Coordinate and oversee all critical environment vendors during maintenance, emergency, and break/fix events to ensure personnel safety and maintain power to the critical load
Perform periodic technical and quality reviews of all MOPs and SOPs to ensure that the most 'up-to-date' techniques and safety guidelines are utilized
Collect and generate internal and vendor field service reports describing all activities (preventive maintenance, repairs, etc.) performed at the facility; reviews all reports prior to submission to end user
Render assistance in administration and regulation of the duties of CET1/2
Conduct training with CET1/2 and other staff personnel on electrical equipment/system for maintenance, repairs and operation
If applicable to the role, perform maintenance, repair, and operation tasks of utility equipment, solar PV equipment, and/or Cogen equipment, and/or disables/enables fire alarm systems; and set up and operate electrical data capturing devices (Dranetz, Fluke PQA, etc.)
Understands and has mastered all types of mechanical and electrical systems and how each component within the system operates in conjunction with the other components and how that impacts the overall operations of the system as a whole
The position requires the ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis
Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials
Proper lifting techniques and safety protocols must be followed to ensure personal and team safety
Relocates a 12 foot stepladder without assistance
Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders
Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis
Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English
May use a standard ladder without exceeding the weight limit while carrying tools
Tell when something is wrong or is likely to go wrong
Apply general rules to specific problems to produce answers that make sense
Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events)
See details at close range (within a few feet of the observer)
Listen to and understand information and ideas presented through spoken words and sentences
Preferred
Possess a Journeyman Electrician License, Journeyman HVAC license or equivalent
Benefits
A competitive salary
Medical, dental, vision, life, and disability insurance
Paid time off
Tuition reimbursement
401k Retirement Plan
Military Reserve pay offset
Paid maternity leave
Company
M.C. Dean, Inc.
M.C. Dean, Inc. offers comprehensive technological systems in Washington.
5001-10000 employees
Funding
Current Stage
Late StageLeadership Team
Bill Dean
Chief Executive Officer
Chris Frazier
Marcomm Business Partner
Recent News
EIN Presswire
2025-11-14
2025-10-04
2025-10-01
Company data provided by crunchbase