Amcor · 17 hours ago
General Technician
Richmond, VA
Full-time
Onsite
Entry Level
1+ years expAmcor is transforming the packaging industry and improving lives around the world. They are seeking a General Technician to perform process and support tasks for the Gravure Press Operation, focusing on quality assurance, material handling, and assisting operators in various duties.
ChemicalInformation TechnologyManufacturingMedicalPackaging ServicesSupply Chain ManagementSustainability
Responsibilities
Receive product from Press, stack and place on pallets
Printing pallet labels with Pecas. Be able to find all information needed on job docket and set up sheet
Ensure correct loading of product onto pallets for Material handling. Robot set-up & troubleshooting if applicable
Ensure quality of jobs completed by reviewing for quality and accuracy; Makes sure jobs are complete and error free. Informs Operators of any problems
Ensures finished product appears to be of highest quality, accurately printed and completed and free of errors
Pull Product samples according to company procedures and send to Quality Auditors as required
Notifies Operator immediately of any problems and/or errors
Downtime duties
Webbing the press
Assist Operators when the press is down
Clean up particular press area, ie, mopping all areas, walls, tables, cans, tanks, floors behind press and also units
Fill solvent cans, solvent mules and auto viscosity cans. Fill varnish tank as needed
Help set-up cylinders carriages for next job
Help roll stand operator make blades, hang or cut down rolls. Help in sort if the above is done and notify Operator
Ensure correct set-up and breakdown of doctor blades using established instructions and procedures
Properly remove/dispose of used doctor blades using all safety procedures. After removal of used blades from press, dispose in safety container for used blades
Clean backup blade
Transport blade holders to the Pre-Make Department for cleaning
Set up new doctor blades according to policies and procedures ensuring all measurements are correct and blade is in proper position
Make-Ready duties
Ensure all product is purged from stacker, tables, color booth, press consoles, and off line sorting machine
Assist in changing impression rollers or change over stacker
Assist in putting tools in press, changing tab breaker section, tear down, and put pump together, separate the different sections of the press from tab section to cutter
Change cylinders, pump out inks, and fill solvent containers. Remove and/or install print unit cassettes
Maintains and follows all company policies and procedures for EHS, personal protection, and hazard materials/waste handling according to established guidelines
Follows all personal protection procedures by use of appropriate personal protective equipment at all times while in designated areas and specific tasks requiring the use of PPE
Follows established procedures and guidelines for the handling and disposal of all hazardous materials/waste
Maintains and wears proper uniform according to company policies
Use Company provided safety lifting equipment, i.e., hoist, jacks, vacuum manipulators, etc
On a regular basis, examines work areas to keep it in a safe and neat condition, including but not limited to proper grounding, cleanup ink and solvent containers. Properly stores and arranges work area to maintain cleanliness and safe environment following all safety rules and regulations for grounding, storage, spill clean-up, etc
Effectively demonstrates the ability to maintain work area in a safe and proper working order including but not limited to cleaning press area, mopping floors, and emptying trashcans
Roll stand Operator Tasks (If Applicable)
Prepare and mount rolls, and operate splicing unit. Record roll information as required for Pecas and NCM's. Setting up cylinders for subsequent jobs
Split cores with the core cutter
Band board waste, and roll wrappers for recycling
Maintain viscosity of varnish according to standard practices with Zahn cup and stop watch
Change out varnish drums when empty disconnect and reconnect ink tanks and auto viscosity, clean varnish or other cylinders when needed
Assist Operators whenever press is down
Forklift Driver (if applicable)
Maintain and support press operation through safe and effective material handling. Safe and correct operation and maintenance of forklift vehicles to ensure proper material moving and forklift operation
Loading and unloading of pallets, waste and recording and weighing of recyclable material
Maintain annual certification of correct procedures and operation of lift equipment
Use lift truck to move loads of raw materials, in-process stock, or finished goods throughout the facility
Spot check load for correct labels and codes, and neatness. Place loads in designated area of warehouse
Provide support to Press, i.e., check schedule board for upcoming jobs, check to make sure press has sufficient materials
Remove waste container changing over full containers to maintain empty container at press at all times
Remove waste and cores from press, weigh and put on trucks for recycling. Supply corrugate, pallets and bundler film at delivery end of press. Make sure all material is in designated areas. Remove finished loads of product from delivery end of press
Ensure proper installation of battery charging equipment and battery replacement according to company policies and procedures. Connect new battery using hoist equipment. Batteries must be charged outside the lift truck
Complete all necessary paperwork as required including a daily lift truck inspection form
Operate all equipment in a safe manner at all times to ensure no damage to Company property or customer product
Report any and all accidents, injuries, and near misses
Actively participates as a member of Press Crew to meet production and team goals. Interacts with operators, co-workers and all staff in a way that promotes respect, encourages cooperation and contributes to excellent performance
As an integral member of a Press Crew, works effectively with other employees. Communicates accurate information to all team members in a professional, respectful, and courteous manner
Exhibits a willingness to assist or help in getting work completed, for example; relieving for breaks, assist on other machines when required, any and all other tasks that may be required or requested by operators, shift leads, department leads or management
Must be very dependable in attendance and punctuality
Must be able to perform any and all work or additional tasks as required or requested by Department Leads, Shift Leads, Operators or Management
Qualification
Required
High School diploma (or GED), one to three years related production experience and/or training: or equivalent combination of education and experience
Must have very good mechanical and physical ability
Lift truck operators must have and maintain safety training for operation of all company equipment
Must be ability to lift up to 60lbs is required
This position may require prolonged periods of standing, stooping, bending and/or reaching, balancing, climbing, kneeling, crouching, reaching with hands and arms, hearing and speaking
Must be able to hold, touch, feel and manipulate with hands product and equipment in a safe manner
Manual dexterity is required
Use of close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus
Must be able to rotate shifts as required
Must be available to work in excess of 8 hours per day and/or 40 hours per week when necessary to meet customer product needs
Must be able to work in repetitive functions as well as other duties as required
Benefits
Medical, dental and vision plans
Paid time off, starting at 40 hours per year for full-time hourly employees, may vary by location
Company-paid holidays starting at 8 days per year and may vary by location
Wellbeing programs & Employee Assistance Program
Health Savings Account/Flexible Spending Account
Life insurance, AD&D, short-term & long-term disability, and voluntary benefits
Paid Parental Leave
Retirement Savings Plan with company match
Tuition Reimbursement (dependent upon approval)
Discretionary bonus program (initial eligibility dependent upon hire date)
Company
Amcor
Amcor is a packaging and container manufacturing company for food and beverage, personal care, and medical industries.
10001+ employees
H1B Sponsorship
Amcor has a track record of offering H1B sponsorships. Please note that this does not
guarantee sponsorship for this specific role. Below presents additional info for your
reference. (Data Powered by US Department of Labor)
Distribution of Different Job Fields Receiving Sponsorship
Represents job field similar to this job
Trends of Total Sponsorships
2025 (1)
2022 (1)
2021 (1)
2020 (1)
Funding
Current Stage
Public CompanyTotal Funding
$2.2B2025-03-13Post Ipo Debt· $2.2B
1969-08-28IPO
Leadership Team
Peter Konieczny
Chief Executive Officer
Ron S Delia
Chief Executive Officer
Recent News
GlobeNewswire
2025-12-26
Company data provided by crunchbase