Exelon · 15 hours ago
Engineering Tech
Libertyville, IL
Full-time
Onsite
New Grad, Entry, Mid Level
$80K/yr - $110K/yr
0+ years expExelon is leading the energy transformation, and they are seeking an Engineering Tech to work on electrical power distribution equipment and associated control circuits. The role involves performing testing assignments, preventive maintenance, and troubleshooting of various electrical systems under the guidance of experienced engineers.
Clean EnergyCommunitiesEnergy
Responsibilities
Dist Automation - Performs well-defined testing assignments under the guidance of an experienced engineer / technician (e.g., preventive and corrective maintenance on supervisory distribution automation equipment. (70%)
Dist Automation - Evaluates the effectiveness of the current distribution system design (e.g., analyze and interpret field data gathered from well defined field tests) (20%)
Dist Automation - Evaluate effectiveness of current technical systems and processes. Participate on teams (e.g., works with distribution engineering and manufacturers to implement new designs) (5%)
Dist Automation - Participate in training (e.g., attend ComEd, vendor and university classes; conduct training) (5%)
Testing Group - Perform preventative maintenance and corrective maintenance on distribution and transmission relays, communications equipment, power reclosers etc., using the guidelines listed in the Field Reference and the Maintenance Procedures manuals (35%)
Testing Group - Conduct basic hands-on acceptance and in-service testing of transmission and distribution equipment (e.g., transformers, circuit breakers, control and relay panels, SCADA, power line carrier, audio tone, etc.) Testing is performed per the guidelines included in the Field Reference Manual and the Maintenance Procedures Manuals. (20%)
Testing Group - Assist with the restoration of malfunctioning transmission and distribution equipment, under emergency conditions, by performing the necessary hands-on testing as outlined in the Field Reference and Maintenance Procedures manuals. (20%)
Testing Group - Receive, participate, and provide some on-the-job and formal classroom training (15%)
Testing Group - Complete required paperwork (reports, test data, blueprint corrections, relay settings, etc) as necessary to document work performed. (10%)
Thermography - Perform preventative maintenance Infrared Thermography scans of substation equipment per assigned schedule (50%)
Thermography - Perform preventative maintenance Corona/UV scans of substation equipment per assigned schedule (20%)
Thermography - Perform analysis of the Infrared Thermography and Corona/UV scan findings and initiate and prioritize corrective actions as required. (15%)
Thermography - Perform SF6 gas scans and analysis to identify gas leak locations on substation equipment. (15%)
Battery Specialist - Maintain specified station batteries in a manner compliant to NERC requirements (70%)
Battery Specialist - Perform annual Preventative Maintenance battery inspections on station batteries & chargers per annual schedules. (10%)
Battery Specialist - Identify & Perform minor Corrective Maintenance on station and microwave batteries & chargers as necessary. (10%)
Battery Specialist - Assist Substation Construction and/or contractors as technical expert for major CM maintenance on station and microwave batteries & chargers. (10%)
Corrosion Control Group - Perform preventative maintenance and corrective maintenance on buried distribution and transmission lines, microwave towers, reverse current switches, ISPs, etc., using the guidelines listed in the ComEd and Corrosion mitigation standards (35%)
Corrosion Control Group - Conduct basic hands-on acceptance and in-service testing of corrosion control equipment installed to protect buried transmission & HVD lines, as well as 4kV, 12kV & 34kV cables, CTA & Metra reverse current drainage systems, microwave towers.) Testing is performed per the guidelines included in the ComEd and Corrosion mitigation standards. (35%)
Corrosion Control Group - Assist with the restoration of malfunctioning transmission and distribution equipment, by performing the necessary hands-on testing & repairs as outlined in the ComEd and Corrosion mitigation standards. (20%)
Corrosion Control Group - Complete required paperwork (reports, test data entry, map corrections, rectifier settings, etc.) as necessary to document work performed. (5%)
Corrosion Control Group - Receive, participate, and provide some on-the-job and formal classroom training (5%)
Qualification
Required
A bachelor's degree in a technical field and 0-3 years of technical experience, an associate's degree and 2-5 years of technical experience, or 5-7 year of technical experience or relevant education, if non-degreed or a non-technical degree
Successful completion of the TECH Test. (A Bachelor's degree in Engineering from an accredited university exempts the TECH Test requirement.)
Good knowledge and experience with regulations, guides, standards, codes, methods, and practices necessary to perform assignments for a specific discipline for maintenance, testing, installation or service
Positions require the ability to read blueprints and schematics and use basic test instruments
Strong organizational and interpersonal communication skills
Valid driver's license
Requires frequent travel to various company substations or other locations within the service territory
Must be available to work shifts and respond to emergency situations (7 days per week / 24 hours per day)
Relevant education/experience is knowledge and/or skills that may be acquired through job experiences or education programs similar to a formal technical degree program. Relevant experience includes experience in a military role (transmission, distribution, gas, power systems, etc.), project management, journey-level electrician or gas technician, field operations, or other utility related experience, as deemed relevant to the role. Relevant educational experience includes company sponsored training programs (ex. PowerUp Academy) or other educational programs, as deemed relevant to the role. The equivalent relevant education / experience requirement is in addition to the position's minimum experience requirements
Preferred
Bachelor's degree in Engineering Technology
Technical experience related to electrical power equipment
Electrical troubleshooting experience preferred for Distribution Automation positions
Benefits
Annual Bonus for eligible positions: 7%
401(k) match and annual company contribution
Medical, dental and vision insurance
Life and disability insurance
Generous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave
Employee Assistance Program and resources for mental and emotional support
Wellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursement
Referral bonus program
And much more
Company
Exelon
Exelon Corporation is a utility services holding company that provides services for energy generation businesses in the United States.
10001+ employees
H1B Sponsorship
Exelon has a track record of offering H1B sponsorships. Please note that this does not
guarantee sponsorship for this specific role. Below presents additional info for your
reference. (Data Powered by US Department of Labor)
Distribution of Different Job Fields Receiving Sponsorship
Represents job field similar to this job
Trends of Total Sponsorships
2025 (8)
2024 (7)
2023 (5)
2022 (6)
2021 (4)
2020 (1)
Funding
Current Stage
Public CompanyTotal Funding
$900M2025-12-01Post Ipo Debt· $900M
2019-09-25IPO
Leadership Team
Calvin Butler
President and Chief Executive Officer
M. Bridget Reidy
Executive Vice President and Chief Operating Officer of Exelon
Recent News
2026-01-09
2025-12-24
Company data provided by crunchbase