Valeo · 4 hours ago
Laboratory Technician
Reno, NV
Full-time
Onsite
New Grad, Entry LevelValeo is a company focused on providing innovative solutions in the automotive sector. They are seeking a Laboratory Technician to ensure compliance with safety and quality standards through audits and testing, as well as maintaining laboratory equipment and documentation.
AutomotiveIndustrial ManufacturingManufacturing
Responsibilities
Know, and apply, the safety and environment rules of the site
Know, apply and teach others to apply the quality rules and quality tools
Perform Audits In Production
Presence and validity of safety and quality work instructions
Start up of the line(s) / machine(s): Audit that the release of the first piece was carried out according to the corresponding standard
Poka Yokes: Audit the proper functioning of quality devices (Poka Yoke, controls integrated into machines….) according to the corresponding standard
Audit the standards (For example: OK start, work instructions, visual inspection standard, parameter setting records, magic square….) displayed & used in production and notify the corresponding Supervisor/ Engineer of any non-conformities
Audit that the controls performed are in line with the control plan requirements: Content, method, frequency, results & reaction to non-conformities
Stop at First Defect (Assembly lines) and Reaction To The First Defect (Upstream processes): Audit that the stoppage and reaction rules to the defect are respected and that a QRAP is open and monitored according to the corresponding standard
Audit that all the product is identified according to its status and according to the corresponding standard
Audit deviations: Method, training, documentation, parts identification, duration/number of parts versus the deviation limit
Support or perform StEDE assessments
Site-specific or product-specific audits
Participate in pre-test meetings, setup and perform laboratory tests, preliminary analysis and summary of test results data, verify compliance with customer specifications and Valeo Work Instructions draft test reports for review by Test / Product Engineers
Develop and maintain plant wide calibration systems according to QS 9000 and American Association of Laboratory Accreditation standards
Calibrate gauges designated for internal calibration
Maintain and perform minor repairs on calipers, micrometers, indicators, and other small quality hand tools. Operate Coordinate Measuring Machine for dimensional verification of products
Application of appropriate computer programs and data acquisition systems, perform program customizations as required
Maintain documentation control (test requests, log sheets, pre-test inspection record, test data, test reports, etc.) Review, updating and generation of Laboratory Work Instructions as required
Maintain proficiency in the operation of all Dimensional Lab equipment. Assist in dimension related problem solving as necessary, utilizing the proper methods and equipment
Monitor functional lab test equipment for proper operation during off-shift hours
Proper Sample Disposition (packaging and storage) per department guidelines
Utilize appropriate Quality Tools (i.e. non-conformance, 5W2H, etc.) for identification of non-quality concerns and root cause investigation
Develop and maintain appropriate level of knowledge of test & measurement equipment operation, including all safety and environmental precautions
Perform routine maintenance, troubleshooting, and repairs on test equipment
Perform in-house calibration of equipment, as well as coordinate calibration with vendors, as required. In-house calibrations to be performed only by certified personnel
Assist with equipment and lab supplies purchases
Have a working knowledge of GD&T and dimensional inspection techniques (CMM, Romer Arm, Laser Tracker, hand tools, etc.) including usage of Faro arm
Accurate/timely reporting of TRS (machine uptime) to promote lab efficiency
Daily recording of hours worked per program using company-standard software (ie. Cordys / PWA / EPM)
Qualification
Required
Know, and apply, the safety and environment rules of the site
Know, apply and teach others to apply the quality rules and quality tools
Perform Audits In Production
Presence and validity of safety and quality work instructions
Start up of the line(s) / machine(s): Audit that the release of the first piece was carried out according to the corresponding standard
Poka Yokes: Audit the proper functioning of quality devices (Poka Yoke, controls integrated into machines….) according to the corresponding standard
Audit the standards (For example: OK start, work instructions, visual inspection standard, parameter setting records, magic square….) displayed & used in production and notify the corresponding Supervisor/ Engineer of any non-conformities
Audit that the controls performed are in line with the control plan requirements: Content, method, frequency, results & reaction to non-conformities
Stop at First Defect (Assembly lines) and Reaction To The First Defect (Upstream processes): Audit that the stoppage and reaction rules to the defect are respected and that a QRAP is open and monitored according to the corresponding standard
Audit that all the product is identified according to its status and according to the corresponding standard
Audit deviations: Method, training, documentation, parts identification, duration/number of parts versus the deviation limit
Support or perform StEDE assessments
Site-specific or product-specific audits
Participate in pre-test meetings, setup and perform laboratory tests, preliminary analysis and summary of test results data, verify compliance with customer specifications and Valeo Work Instructions draft test reports for review by Test / Product Engineers
Develop and maintain plant wide calibration systems according to QS 9000 and American Association of Laboratory Accreditation standards
Calibrate gauges designated for internal calibration
Maintain and perform minor repairs on calipers, micrometers, indicators, and other small quality hand tools
Operate Coordinate Measuring Machine for dimensional verification of products
Application of appropriate computer programs and data acquisition systems, perform program customizations as required
Maintain documentation control (test requests, log sheets, pre-test inspection record, test data, test reports, etc.) Review, updating and generation of Laboratory Work Instructions as required
Maintain proficiency in the operation of all Dimensional Lab equipment
Assist in dimension related problem solving as necessary, utilizing the proper methods and equipment
Monitor functional lab test equipment for proper operation during off-shift hours
Proper Sample Disposition (packaging and storage) per department guidelines
Utilize appropriate Quality Tools (i.e. non-conformance, 5W2H, etc.) for identification of non-quality concerns and root cause investigation
Develop and maintain appropriate level of knowledge of test & measurement equipment operation, including all safety and environmental precautions
Perform routine maintenance, troubleshooting, and repairs on test equipment
Perform in-house calibration of equipment, as well as coordinate calibration with vendors, as required
In-house calibrations to be performed only by certified personnel
Assist with equipment and lab supplies purchases
Have a working knowledge of GD&T and dimensional inspection techniques (CMM, Romer Arm, Laser Tracker, hand tools, etc.) including usage of Faro arm
Accurate/timely reporting of TRS (machine uptime) to promote lab efficiency
Daily recording of hours worked per program using company-standard software (ie. Cordys / PWA / EPM)
Company
Valeo
Valeo is an automotive supplier and manufacturer that designs and produces a wide range of automotive products.
Founded in 1923
10001+ employees
H1B Sponsorship
Valeo has a track record of offering H1B sponsorships. Please note that this does not
guarantee sponsorship for this specific role. Below presents additional info for your
reference. (Data Powered by US Department of Labor)
Distribution of Different Job Fields Receiving Sponsorship
Represents job field similar to this job
Trends of Total Sponsorships
2024 (2)
2023 (5)
Funding
Current Stage
Public CompanyTotal Funding
$2.87BKey Investors
European Investment Bank
2025-09-16Post Ipo Debt· $590.4M
2024-04-04Post Ipo Debt· $921.11M
2023-10-06Post Ipo Debt· $635.63M
Leadership Team
Christophe Périllat
Chief Executive Officer
Catherine Delhaye
Chief Ethics, Compliance & Data Protection Officer
Recent News
2026-01-23
2026-01-21
Business Wire
2026-01-05
Company data provided by crunchbase